Miele G 7804 Operating And Installation Instructions page 7

Laboratory glassware washer
Table of Contents

Advertisement

~
The lab washer is only designed to
operate with water and the
recommended processing chemicals.
The machine must NOT be operated
with organic solvents or flammable
liquids. This may cause an explosion or
damage to rubber and plastic
components, which in turn allows liquid
substances to leak out.
~
Avoid inhaling detergent. If
swallowed, it can cause burning in the
mouth and throat or inhibit breathing.
~
Be careful when sorting and loading
items to be washed: locate sharp items
so that they are not likely to damage the
door seal; and load sharp knives with
the handles up to reduce the risk of
injuries.
~
The water in the machine must not
be used as drinking water.
~
Do not sit or lean on the open door.
This could cause the machine to tip or
be damaged.
~
Never clean the machine or near its
vicinity with a water or high pressure
hose.
~
Only use cleaning agents
formulated for special processes and
approved by Miele for use with this
labwasher. Use of unsuitable cleaning
agents could adversely affect the
components of the machine.
~
Pre-treatments with detergents can
create suds, as can certain rinsing
agents. For pre-treatment and / or
cleaning only, use low-sudsing
detergents which have been approved
by Miele. Suds can have an adverse
effect on the cleaning process.
IMPORTANT SAFETY INSTRUCTIONS
~
recommended on technical application
grounds (e.g. with a detergent), this
does not imply that the manufacturer of
the labwasher takes responsibility for
the affect of the chemical on the
material of the items being cleaned.
Please be aware that changes in
formulation, storage conditions, etc.,
which may not be publicized by the
chemical producer, can have a
negative effect on the cleaning result.
~
chemical manufacturer when using
detergents and special application
chemicals. Only use such chemicals for
the purpose and in the situation
specified to avoid such dangers as
chemical reactions and material
damage.
~
operation with water and additive
cleaning agents. Organic solvents must
not be used in the machine. An
explosion or machine corrosion could
occur with the use of organic solvents.
~
stringent requirements must be met, it
is highly recommended that all relevant
factors for the process, such as
cleaning agent, quality of water, etc.,
be discussed with a Miele Application
Specialist.
~
especially stringent cleaning and
rinsing results, the operator must
ensure that quality control occurs on a
regular basis.
When a chemical additive is
Always follow the instructions of the
The labwasher is designed only for
In critical applications where very
For applications that demand
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents