Thermo Switch - Miele G 7804 Operating And Installation Instructions

Laboratory glassware washer
Table of Contents

Advertisement

Frequently asked questions

Thermo switch

This lab washer has a resettable heater
limiter which will shut off the elements in
the event of over-heating. This could be
caused for example, if large articles
cover the heating elements or if the
filters in the wash cabinet are blocked.
If the following fault shows: F01 - F02
(Water in the wash cabinet is not
heated, the program cycle takes too
long). Please proceed as follows.
^ Remove the cause of the problem.
^ Remove the service plinth.
^ Press the reset button on the
temperature sensor on the right side.
If this switch trips repeatedly, contact
the Miele Technical Service
Department.
58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents