Miele G 7804 Operating And Installation Instructions page 65

DI-Water connection
The machine comes with a standard
connection for a pressure-resistant
system. The recommended water
pressure (flow rate) is 25 - 60 psi
however, water pressure of 10 - 147 psi
is acceptable.
^ The DI pressure-tested hose (marked
"H O pure") with a
2
must be connected to the on-site
water valve for DI purified water.
If the DI water connection is not
used, the electronics needs to be
reprogrammed by a Miele technician.
The water intake hose remains at the
rear side of the machine.
3
/ " hose thread
4
Plumbing
65