Turning on the lab washer
^ Make sure the spray arms are not
blocked.
^ Close the door.
^ Press the "On/Off" button to turn the
machine on.
Starting a program
Choose a program based on the type
of glassware being cleaned and the
degree of soiling.
Refer to the "Program Guide" for more
details.
^ Turn the program selector clockwise
or counterclockwise to the desired
program.
The wash temperature of the selected
program is shown in the display
(except for "Rinse" and "Drain").
The "Start" indicator will flash.
Select the Drying 3 function
if desired
"Drying" may be selected as an
additional feature once a program has
been selected (except in the "Rinse"
and "Drain" programs).
^ Select the "Drying" button.
Drying is phased over 10 minutes. The
total running time of the program
lengthens accordingly.
Changing a program
The program can only be changed if
the Start button has not been pressed.
^ Turn the program selector to the
desired program.
^ Select the "Drying" feature, if desired.
^ Press the "Start" button.
Operation
31