Miele G 7804 Operating And Installation Instructions page 6

IMPORTANT SAFETY INSTRUCTIONS
~
Do not use an extension cord to
connect this machine to electricity.
Extension cords do not guarantee the
required safety of the machine (e.g.
danger of overheating).
~
Defective components should be
replaced by Miele original parts only.
~
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
~
When work has been performed on
the supply plumbing, air must be bled
from the supply line to the labwasher.
Otherwise, the water softening system
may be damaged.
6
Use
~
Please follow the advice on
installation in this manual and in the
separate Installation Instructions.
~
Personnel operating the lab washer
should be trained regularly. Children
and untrained personnel must not be
allowed access to the machine or its
controls.
~
Persons who lack physical, sensory
or mental abilities, or experience with
the machine should not use it without
supervision or instruction by a
responsible person.
~
Do not allow children to play in or
around the machine, or to operate it.
~
BURN AND SCALD HAZARD
This machine reaches very high
temperatures. Take care when
unloading the unit. Let baskets and
inserts cool before touching them. Any
water which may remain in containers
will be very hot and should be emptied
into the wash cabinet.
~
BURN HAZARD
The heating elements become
extremely hot during use. Do not touch
the heating elements during or directly
after the end of a program.
~
Take care when handling
processing chemicals (detergents,
softeners, neutralizers, etc.). These may
contain irritant or corrosive ingredients.
Wear protective gloves and goggles.
With all chemical agents the
manufacturer's safety conditions must
be observed.