Table of Contents
Advertisement
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW GAS APPLIANCE MANU-
FACTURED BY LENNOX HEARTH PRODUCTS.
When you purchased your new gas fi red heater, you joined the ranks of thousands of
concerned individuals whose answer to their home heating needs refl ects their concern for
aesthetics, effi ciency and our environment. We extend our continued support to help you
achieve the maximum benefi t and enjoyment available from your new gas fi red heater. It
is our goal at Lennox Hearth Products to provide you, our valued customer, with an appli-
ance that will ensure you years of trouble free warmth and pleasure.
Thank you for selecting a Lennox Hearth Products gas fi red heater as the answer to
your home heating needs.
Sincerely,
All of us at Lennox Hearth Products
TABLE OF CONTENTS
This installation manual will help you obtain
a safe, effi cient, dependable installation for
your appliance and vent system.
PLEASE READ AND UNDERSTAND THESE
INSTRUCTIONS BEFORE BEGINNING
YOUR INSTALLATION.
This appliance may be used with a thermo-
stat (see Optional Wall Thermostat). This
appliance is certifi ed for use in bedrooms.
If installed in a bedroom in Canada, a ther-
mostat IS required.
2
PACKAGING LIST
The assembled vented gas fi replace heater
page 2
is packaged with:
page 2
page 3
• One accessory package containing a
page 4
literature package (installation and operation
page 4
instruction manuals) is located on top of the
appliance.
page 4
• One log set, one bag of embers, one bag of
page 5
vermiculite, one propane conversion kits.
page 7
• One Warranty Certifi cate.
page 8
• One Fireplace Warning Label.
page 8
• One Draft Hood Sliding Tool.
page 9
page 9
SURROUND ASSEMBLY SOLD SEPA-
page 9
RATELY
page 9
page 9
MODEL: EBVI25
page 9
SKS-25, Surround Kit, Small
page 12
(41 1/16" W x 26 1/16" H)
page 12
SKM-25, Surround Kit, Medium
page 13
(44 1/8" W x 27 5/8" H)
page 14
page 14
MODEL: EBVI30
page 14
SKS-30, Surround Kit, Small
page 14
(40 1/4" W x 27 1/2" H)
page 14
SKM-30, Surround Kit, Medium
page 16
(45 3/4" W x 30 1/4" H)
page 16
SKL-30, Surround Kit, Large
page 17
(49 1/4" W x 30" H)
page 17
page 18
INTRODUCTION
This appliance complies with National
Safety Standards and is tested and listed
by OMNI-Test Laboratories Inc.; Beaverton,
Oregon (Report No. 116-F-15-5) to ANSI
Z21.88-2002 (in Canada, CSA-2.33-2002),
and CAN/CGA-2.17-M91 in both USA and
Canada, as vented gas fi red room heater.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Installation must conform to local codes. In
the absence of local codes, installation must
comply with the current National Fuel Gas
Code, ANSI Z223.1. (In Canada, the current
CAN-1 B149 installation code.) Electrical
wiring must comply with the National Elec-
trical Code ANSI/ NFPA 70 - latest edition.
In Canada, the current CSA C22-1 Canadian
Electrical Code - latest edition.
This appliance requires an adequate supply
of combustion and ventilation air. As an
aid in determining whether or not these
requirements have been satisfi ed, follow the
procedure indicated in the section entitled
Spill Test Procedure (see page 16).
This gas fi replace heater is a natural con-
vection, heat circulating gas fi replace insert
designed for residential applications.This
heater is designed to be installed into an exist-
ing masonry or factory built solid fuel burning
fi replace only - Masonry fi replace must be
built to UBC 37 or ULC S628 standards and
factory built (zero clearance) fi replace must be
listed to UL 127 or ULC S610. Units must use
a 4" listed B-Vent or listed liner (conforming
to UL 1777) from the appliance outlet to the
chimney termination. The venting system
must be routed through the existing fi replace
fl ue system to the vent termination.
This millivolt appliance is designed to oper-
ate on natural gas or propane gas only.
A millivolt gas control valve with piezo igni-
tion system provides safe, effi cient operation.
External electrical power is required to operate
the blower.
This unit is factory set for use with Natural
Gas and will require a fi eld conversion for use
with Propane (other fuels are NOT allowed).
The use of other fuels or combination of fuels
will degrade the performance of this system
and may be dangerous.
DO NOT ATTEMPT TO ALTER OR MODIFY
THE CONSTRUCTION OF THE APPLIANCE OR ITS
COMPONENTS. ANY MODIFICATION OR ALTERA-
TION MAY VOID THE WARRANTY, CERTIFICATION
AND LISTINGS OF THIS UNIT.
The millivolt appliance is manually con-
trolled and features a spark igniter (piezo)
that allows the appliance's pilot gas to be
lit without the use of matches or batteries.
This system provides continued service in
the event of a power outage.
- Quick Links:
- Step 11 Install Log Set
Hide quick links:
Advertisement
Table of Contents
