1.
Assume you have a registered domain name from the DDNS provider, say
hostname.dyndns.org, and an account with username: test and password: test.
2.
In the DDNS setup menu, check Enable Dynamic DNS Setup.
Available settings are explained as follows:
Item
Enable Dynamic
DNS Setup
Set to Factory
Default
View Log
Force Update
Auto-Update
interval
Index
Domain Name
Active
Clear All
3.
Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Description
Check this box to enable DDNS function.
Clear all profiles and recover to factory settings.
Display DDNS log status.
Force the router updates its information to DDNS server.
Set the time for the router to perform auto update for DDNS
service.
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Display the domain name that you set on the setting page of
DDNS setup.
Display if this account is active or inactive.
Disable the Function and Clear all Dynamic DNS
Accounts -
In the DDNS setup menu, uncheck Enable Dynamic DNS
Setup, and push this button to disable the function and clear
all accounts from the router.
Delete a Dynamic DNS Account -
In the DDNS setup menu, click the Index number you want
to delete and then push this button to delete the account.
186
Vigor2110 Series User's Guide