Draytek Vigor 2110 User Manual page 127

Each item is explained as follows:
Item
Index
Comment
Local IP Address
Status
To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
Available settings are explained as follows:
Item
Enable Open Ports
Comment
WAN IP
Local Computer
Protocol
Vigor2110 Series User's Guide
Description
Indicate the relative number for the particular entry that you
want to offer service in a local host. You should click the
appropriate index number to edit or clear the corresponding
entry.
Display the name for the defined network service.
Display the private IP address of the local host offering the
service.
Display the state for the corresponding entry. X or V is to
represent the Inactive or Active state.
Description
Check to enable this entry.
Make a name for the defined network application/service.
This setting is available when WAN IP Alias is configured.
Specify the WAN IP address that will be used for this entry.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of the
local host in the list.
Specify the transport layer protocol. It could be TCP, UDP,
or ----- (none) for selection.
119