Tab "Manual Control - Robin DLS User Manual

Theatre Mode - The mode reduces noise of the fixture due to fine control of fans and reduced speed of pan/tilt
movement and gobo/prism rotation.
Off - The option is disabled
Auto - Automatic regulation of fans noise level.
Silent - After selecting this item, the option "Fan Noise Level" is accessible where desired level of the
fans noise can be set.
Colour Calibration Mode - If the function is on, the white output from the fixture (and also mixed colours) is
more uniform. Each colour is dynamically corrected according to the value set in the menu "Calibrate Effects"
(Service-> Calibrations-> Calibrate Effects).
Colour Mixing Mode - This item allows switching into RGBW or CMY mode. In the CMY mode, the white(8bit)/
white (16) bit channels are not active.
White Point 8000K - If the function is on, at CTO channel you can set desired calibrated white in range of
8000K-2700K. Necessary condition is , that RGBW channels has to be full or set at the same DMX value. An-
other way, how to get desired white colour is to set RGB channels to 0 and use only white channel and CTO.
CTO function does not effects mixed colours except whites.
If you wish to "apply" CTO filter on mixed colours, set this menu item to Off.
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings - Use this menu to change the touch screen settings.
Display Intensity - The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay - The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock - The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen - The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the fixture is hanging on the truss).
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note: Auto option is set as default. You change the display orientation by touching the icon
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit - Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the fixture fans to max. power mode ("High") or to auto-control mode
("Auto").
Date & Time Settings - Use this menu to set current date and time for the fixture log system (menu "View
Logs"). Set this menu item before first fixture operation.
Default Settings - The menu item allows to set all fixture parameters in this menu to the default (factory) values
except items "DMX Input" and "Theatre Mode ".

7.4 Tab "Manual Control"

Reset Functions - The menu allows to reset the fixture either per function modules or all modules together.
Total Reset - The item resets all function modules.
Pan/Tilt Reset - The item resets a pan and tilt movement.
Gobo System Reset - The item resets a static/rotating gobo wheel.
Optics/Prism/Frost Res. - The item resets a zoom, focus, prism and a frost module.
Iris/Fr. Shutters Effect Wheel Reset - The item resets an iris module and framing shutters.
3
on the display,