Q u i c k
•
Although your SPT 1800 is water and dust resistant, do not
expose it to rain or moisture for an extended period. Treat
your SPT 1800 as you would a pocket calculator or other
small electronic instrument.
•
The touch-sensitive screen of your SPT 1800 contains glass.
Do not subject your SPT 1800 to any strong impact.
•
Protect your SPT 1800 from temperature extremes. Do not
leave it on the dashboard of a car on a hot day, and keep it
away from heaters and other heat sources.
•
Do not store or use your SPT 1800 in any location that is ex-
tremely dusty, damp or wet.
•
If the surface of the SPT 1800 screen becomes soiled, clean
it with a soft lens cloth moistened with a diluted window-
cleaning solution.
Troubleshooting
Problem
SPT 1800 terminal
does not turn on.
Low battery warning
after replacing the
battery.
R e f e r e n c e
Cause
Contrast is set too
light.
Battery is not fully
charged.
Battery is defec-
tive.
A normal condi-
tion.
13
Solution
Adjust the contrast control.
Make sure the battery is fully charged
and installed properly.
Replace the battery. If your SPT 1800
terminal still does not operate, try a soft
reset; see
Resetting the SPT 1800 on
page
11.
The battery warning message may ap-
pear immediately after replacing the
battery. In addition, if you check the bat-
tery gauge in the Applications Launcher
immediately after replacing the battery,
the gauge may start at "empty" and
slowly rise to "full." This is normal. It
takes a minute for the battery gauge to
accurately show the condition of the bat-
tery.