Before Installation; Installation Regulations; Installation Requirements; Gas Supply - Baxi MainEco Heat 15 Installation And Service Manual

5

Before Installation

5 Before Installation
5.1

Installation Regulations

5.2

Installation Requirements

22 MainEco Heat
WARNING
Installation, repair and maintenance must only be
carried out by a competent person. This document is
intended for use by competent persons.
Installation must be carried out in accordance with the prevailing
regulations, the codes of practice and the recommendations in
these instructions.
Installation must also respect the following points:
This instruction manual and any other applicable
documentation.
Building Regulations.
British Standards.
92/42/EEC Efficiency Directive.
2009/142/EC Gas Appliance Directive.
2006/95/EC Low Voltage Directive.
2004/108/EC Electromagnetic Compatibility Directive.
Gas safety regulations.
Water supply regulations.
5.2.1

Gas Supply

1. The gas installation should be in accordance with the relevant
standards. In GB this is BS 6891 (NG). In IE this is the current
edition of I.S. 813 "Domestic Gas Installations".
2. The connection to the appliance is a 22mm copper tail
located at the rear of the gas service cock.
3. Ensure that the pipework from the meter to the appliance is of
adequate size and the demands of any other gas appliances in
the property are taken into consideration.
4. The gas service cock incorporates a pressure test point.
7215845 - 01 (08/14)