Memory Card Recording & Playback; Memory Card Recording; Basic Shooting (Snapshot) - JVC GR GR-DX100 Instructions Manual

Digital video camera
Hide thumbs Also See for GR GR-DX100:
Table of Contents

Advertisement

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera for
taking snapshots.
Perform the procedures listed below before continuing.
Power (
pg. 7)
Grip Adjustment (
pg. 8)
Viewfinder Adjustment (
Loading A Memory Card (
Picture Quality/Image Size Setting (
1
Set the VIDEO/MEMORY Switch
then set the Power Switch
pressing down the Lock Button
switch. Open the LCD monitor fully or pull out the
viewfinder fully.
2
Press SNAPSHOT
the snapshot is being taken.
The image is recorded on the memory card.
• Still images are recorded in the snapshot mode with
no frame.
To Delete Unwanted Still Images . . .
..... when unwanted still images are stored in the
memory card or its memory is full, refer to
"Deleting Files" (
still images.
To Remove The Shutter Sound . . .
..... when you do not want to hear the shutter sound,
set "BEEP" to "OFF" in the Menu Screen
(
pg. 34). The sound is no longer heard from the
speaker.
NOTES:
Even if "DIS" is set to "ON" (
be disabled.
If Snapshot recording is not possible, "PHOTO"
when SNAPSHOT
is pressed.
If Programme AE with special effects (
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
If shooting is not performed for approx. 5 minutes when
the Power Switch
is set to "
supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
close the LCD monitor and re-open it. When using the
viewfinder, push back it in and pull it out again.
The Motor Drive mode (
VIDEO/MEMORY Switch
When a cable is connected to the S/AV connector
shutter sound is not heard from the speaker, however it is
recorded onto the tape.
Still images taken are compliant to DCF (Design rule for
Camera File system). They do not have any compatibility
with devices which are not compliant to DCF.
pg. 8)
pg. 11)
pg. 11)
to "MEMORY",
to "
" or "
" while
located on the
Q
. "PHOTO"
appears while
pg. 20) and delete unwanted
pg. 33), the Stabiliser will
Q
pg. 27) is
" or "
" and power is
pg. 29) is disabled when the
is set to "MEMORY".
Image Size
Shooting icon
1024
Display
To Protect Valuable Files (available only for SD
Memory Card) . . .
blinks
Write/erase
protection tab
..... slide the write/erase protection tab on the side
of the memory card in the direction of "LOCK".
This prevents the memory card from being
recorded over. To record on this memory card,
slide the tab back to the position opposite to
"LOCK" before loading it.
, the
pg. 11
pg. 54, 55
Card icon
Remaining number of shots
1
5
pg. 54, 55
(Approximate Number of
Storable Images
Picture Quality

MEMORY CARD RECORDING

pg. 54, 55
pg. 18)
pg. 11
EN
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents