Memory Card Recording; Basic Shooting (Snapshot) - JVC GR-DVL522 Instructions Manual

26
EN
SNAPSHOT Button
Power Switch
Lock Button
VIDEO/MEMORY Switch (Open the LCD
monitor to access this switch.)
1024
Display
Image Size
Displays the image file size: 1024 (1024 x 768) or 640 (640 x 480) (
Shooting icon
Appears and blinks during shooting.
Card icon
Appears during shooting and blinks when a memory card is not loaded:
(SD Memory Card) or
1 5
Remaining number of shots
Displays the remaining number of shots that can be stored.
The number increases or decreases depending on the Picture Quality/Image Size, etc.
Picture Quality
Displays the quality of image: F (Fine) or S (Standard) (in order of quality) (

MEMORY CARD RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera
for taking snapshots.
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power ( pg. 8)
Grip Adjustment ( pg. 10)
Viewfinder Adjustment (
Loading A Memory Card (
Picture Quality/Image Size Setting (
1
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "
while pressing down the Lock Button located on the
switch.
2
Press SNAPSHOT. "PHOTO" appears while the
snapshot is being taken.
The image is recorded on the memory card.
• Still images are recorded on the snapshot mode
with no frame.
(MultiMediaCard).
pg. 10)
pg. 14)
pg. 14)
" or " "
pg. 14).
pg. 14).