Dubbing; Dubbing To Or From A Vcr - JVC GR GR-DX100 Instructions Manual

Dubbing To Or From A VCR

To Use This Camcorder As A Player
1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 16.
2
Set the VIDEO/MEMORY Switch
then set the camcorder's Power Switch
while pressing down the Lock Button
switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
on the camcorder.
4/6
5
Press 4/6 on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and press
on the camcorder.
4/6
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
As the camcorder starts to play your footage it will appear
on your TV. This will confirm the connections and the
AUX channel for dubbing purposes.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen ( pg. 34, 36).
Or, press DISPLAY
turn on/off the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 35, 36).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
To Use This Camcorder As A Recorder
1. Set the VIDEO/MEMORY Switch
then set the camcorder's Power Switch
" " while pressing down the Lock Button
located on the switch.
2. Set "S/AV INPUT" to "A/V IN" or "S IN" and set
"REC MODE" to "SP" or "LP" (
3. Connect the cables as shown in the illustration and
load a cassette to record on.
to "VIDEO",
to "
located on the
on the remote control to
pg. 34, 36).
to "VIDEO",
to
pg. 35).
4. Press START/STOP
engage the Record-Pause mode. "
" " appears on the screen.
S IN
5. Press START/STOP
start recording.
6. Press START/STOP
again to engage the Record-Pause mode.
stops rotating.
"
NOTES:
To use an output cable adapter (commercially available),
refer to its instructions.
After dubbing, set "S/AV INPUT" back to "OFF".
Analogue signals can be converted to digital signals with
this procedure.
It is also possible to dub from another camcorder.
To S/AV
Not
connected
Cable
Adapter***
* When connecting the cables, open this cover.
** Connect when the S-Video connection is not used.
*** If your VCR has a SCART connector
To use this camcorder as a player [ use the provided
cable adapter.
To use this camcorder as a recorder [ use a
commercially available output cable adapter.
on the remote control to
A/V IN
on the remote control to
4
rotates.
on the remote control
Connector
cover*
S-Video/Audio/Video/Editing
cable (provided)
To AUDIO, VIDEO** and
S-Video connectors
VCR
" or
4
TV
EN
37

DUBBING