Page 1
820409 PURA SERIES ROBOTIC POOL CLEANER QUICK START GUIDE PLEASE READ CAREFULLY BEFORE USING YOUR POOL CLEANER Aqua Products, Inc 282 Grove Avenue Cedar Grove, NJ 07009 United States...
Page 2
QUICK START INSTRUCTIONS (Steps 1-5) Plug the power supply into a GFCI outlet (Ground Fault Straighten out the floating cable. Then lift the flap on the Circuit Interrupter) power supply. Plug in the cable. ON / Place the cleaner in your pool and turn upside down to Turn power supply ON remove any air bubbles.
Page 3
ROBOT REmOvAl and FIlTER BAG ClEANING INSTRUCTIONS (Steps 7-11) / OFF Make sure that the power supply is turned OFF Gently pull cleaner to edge using the E-Z Swivel. Lift unit out with handle and let the water drain. Push tabs down and outward to remove the cover. This Remove filter bags from inside cleaner by gently pulling on will remove the cover and expose the filter bags.
By changing the axle set-up using the You may also download the Quick Start Guide as well as the Settings and pins underneath your cleaner, you can Troubleshooting Manual at: www.Aquabot.com adjust how tight or wide the cleaner turns. This can also be used to help...
Need help?
Do you have a question about the Pura Series and is the answer not in the manual?
Questions and answers