Aquabot RAPIDS 4WD Settings And Troubleshooting Manual

Aquabot RAPIDS 4WD Settings And Troubleshooting Manual

Robotic pool cleaner

Advertisement

820412
BK0015400\REV
RAPIDS 4WD
ROBOTIC POOL CLEANER
SETTINGS AND TROUBLESHOOTING GUIDE
PLEASE READ CAREFULLY BEFORE
USING YOUR POOL CLEANER
Aqua Products, Inc
282 Grove Avenue
Cedar Grove, NJ 07009
United States

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RAPIDS 4WD and is the answer not in the manual?

Questions and answers

Summary of Contents for Aquabot RAPIDS 4WD

  • Page 1 820412 BK0015400\REV RAPIDS 4WD ROBOTIC POOL CLEANER SETTINGS AND TROUBLESHOOTING GUIDE PLEASE READ CAREFULLY BEFORE USING YOUR POOL CLEANER Aqua Products, Inc 282 Grove Avenue Cedar Grove, NJ 07009 United States...
  • Page 2 product settings and troubleshooting WArnings WArning: Do not turn the Power Supply on, unless the pool cleaner is in the water. WArning: Do not operate your machine while people swim in the pool. WArning: The Power Supply must be placed at least 12 feet / 4 meters from the pool’s edge at all times! See diagram below. WArning: To prevent possible electric shock hazard this unit must be connected to an RCD (Residual Current Device) with a related residual operating current not exceeding 30mA.
  • Page 3 product settings and troubleshooting product settings tiMer settings / pool siZe The pool cleaner will start working as soon as the power supply is plugged into the wall outlet and the floating cable is plugged into the power supply socket. The indicator light on the power supply lights up to confirm that the cleaner is working.
  • Page 4 product settings and troubleshooting product settings re-instAlling Filter bAsKets AFter cleAning After you have cleaned the filter baskets of the collected debris, you’ll need to re-install them back into the cleaner. Make sure the channels on the basket are clear of any debris or they won’t close completely. Carefully slide them back into the cleaner so they are secure.
  • Page 5 product settings and troubleshooting rotAting scrubbing brush This model comes complete with a rotating scrubbing brush located underneath the cleaner. This brush is a moving part and is powered by your cleaner. It is meant to pass over surfaces and scrub as a an additinal complimentary cleaning method. This brush is may be removed for easy maintenance.
  • Page 6 Should you need help with an issue that is not described in this manual, please the number below. cAll custoMer serVice At 800-221-1750 You may also download the Quick Start Guide as well as the Settings and Troubleshooting Manual at: www.Aquabot.com...
  • Page 8 Aqua Products, Inc 282 Grove Avenue Cedar Grove, NJ 07009 United States...

Table of Contents

Save PDF