Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Reciprocating Mechanism
ASSEMBLING
(5) Assemble Housing R (Fig. 8).
Fig. 8
10. Mount Change lever to the Switch
while inserting the protrusion of Switch
into the hole of Change lever.
Change lever
[3] -3. Lever 19
DISASSEMBLING
(1) After separating Housing R, remove DC motor and Reciprocating mechanism from Housing L.
So, the stem of Lever 19 comes into your sight. Now, Lever 19 can be disassembled by removing Stop ring E-4
(Fig. 9).
Fig. 9
1. Remove Stop ring E-4 from
the stem of Lever 19.
DC motor
Stop ring E-4
Stem of
Lever 19
ASSEMBLING
Take the reverse step of Disassembling (Fig. 9).
Housing R
2. Pull off the Lever 19 while paying attention not
to lose Steel ball 4 and Compression spring 14.
Reciprocating
mechanism
Compression
Spring 4
Steel ball 4
Housing L
11. Assemble Housing R while
inserting Change lever into
the assembling hole.
Change lever
Housing L
Lever 19
P 7/ 11
Advertisement
