Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Reciprocating Mechanism
DISASSEMBLING
(1) Separate Housing R from Housing L (Fig. 2).
(2) Now, Reciprocating mechanism can be disassembled (Fig. 4).
Fig. 4
1. Remove Leaf spring.
Leaf spring
4. Remove Slider section from the
Collared sleeve 4.
Slider section
Slider
7. Now, remove Gear
complete and Pin 3.
Gear complete
2. Turn DC motor shaft to move
Collared sleeve 4 up to the top
position of Slider's elliptical hole.
Slider
Collared
sleeve 4
5 . Remove Collared sleeve 4.
Collared sleeve 4
8. Remove Balance plate and Push plate
from Bearing case complete.
Bearing case
complete
Pin 3
Push plate
Dust seal
Housing L
Collared sleeve 4
9. Remove DC motor from Bearing
Balance plate
Bearing case
complete
3. A space for removing
Slider from Collared
sleeve 4 is secured.
6 . Remove Retaining
ring S-6 with 1R291.
Retaining ring S-6
Note;
Retaining ring S-6 is deformed
in this step. Do not re-use it.
case complete with 1R269.
DC motor
P 4/ 11
Collared
sleeve 4
Advertisement
