Chapter 6: Device Manager
This chapter describes the installation procedures for the Device Manager.
Overview
The Device Manager provides the following:
Managing and monitoring Power over Ethernet.
●
Device Configuration - Viewing and modifying the different device configurations.
●
Virtual LANs - Viewing and editing Virtual LAN information.
●
Link Aggregation Groups (LAGs) - Viewing and editing LAG information.
●
Port Redundancy - Setting port redundancy for ports in a P333R-LB Switch.
●
Port Mirroring - Setting up port mirroring for ports in a P333R-LB Switch.
●
Trap Managers Configuration - Viewing and modifying the Trap Managers Table.
●
Switch Connected Addresses - View devices connected to selected ports.
●
Port Security.
●
Intermodule Redundancy
●
One pair per stack.
●
Also operates as a result of a module fault, for example, power failure.
●
System Requirements
Minimum hardware and operating system requirements are:
Pentium II 400 Mhz-based computer with 128 Mb of RAM.
●
Screen resolution of 1024 x 768 pixels.
●
Microsoft Internet Explorer 5 or higher.
●
Microsoft Windows 2000 Workstation or Windows XP.
●
Issue 1 September 2005
31