Installing The Usb And Crt Cable, Fingerprint Board And Bluetooth Card - Toshiba Satellite A215 Maintenance Manual

4.11 USB and CRT Cable, Finger Print Board and Bluetooth
Installing the USB and CRT Cable, Finger Print Board and Bluetooth Card
Install the USB and CRT Cable, Finger Print Board and Bluetooth Card according to the
following procedures and Figure 4-20.
Note: Be careful of the kill switch button for the USB board. It can be damaged when
installing the USB board. Make sure it is in the correct position.
1. Seat the Bluetooth card in the correct position and connect the Bluetooth card cable to
CN17 on the system board.
2. Secure the fingerprint board with two M2x3 flat head screw.
3. Seat the fingerprint board in the correct position and connect the fingerprint SUMI-
card to CN13 on the print board.
4. Secure the CRT cable with one M2.5x4 flat head screw.
5. Seat the CRT cable in the correct position and connect the CRT cable to CN10 on the
print board.
6. Seat the USB cable in the correct position and connect the USB cable to CN15 on the
system board.
Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual
4 Replacement Procedures
4-37