4.6 ODD Bay Module
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble
or replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4-8.
1. Remove two M2x3 white flat head screws.
2. Remove the bracket.
Figure 4-8 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-8.
1. Seat the bracket and secure it with two M2x3 white flat-head screws.
Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual
4 Replacement Procedures
4-21