Installing The Dc In Cable, Card Reader Board And Bluetooth Card - Toshiba Satellite L630 Maintenance Manual

4 Replacement Procedures

Installing the DC IN cable, Card reader board and Bluetooth Card

Install the DC IN cable, Card reader board and Bluetooth Card according to the following
procedures and Figure 4-30.
Note A: Be careful of the kill switch button for the USB board. It can be damaged when
installing the USB board. Make sure it is in the correct position.
Note B: Before assembly DC IN cable, please make sure hinge already fixed on bottom
case.
1. Seat the Bluetooth card in the correct position and connect the Bluetooth card cable to
Bluetooth card.
2. Seat the card reader board in the correct position and connect the card reader board
cable to CN9300 on the card reader board.
3. Secure Card reader board with one M2.5x5 black flat head screw and one M2x2.5
black flat head screw.
4. Seat the DC IN cable in the correct position.
5. Seat the USB cable in the correct position and connect the USB cable to CN16 on the
system board.
4--50
4.19 DC IN cable, card reader board and Bluetooth card
Satellite/Satellite Pro/L630/L635 Maintenance Manual