Gateway M460 Service Manual page 31

www.gateway.com
Tips & Tricks
Inserting a piece of cloth between the
screwdriver and keyboard will help
prevent damage to the notebook.
If the cover is not correctly replaced, the
notebook could be damaged when you
try to close the LCD panel.
Insert the small flat-blade screwdriver or non-marring tool under the right
6
end of the keyboard cover and gently pry it up.
Pull the old cover off the notebook. You will hear small snapping sounds
7
as the cover comes away from the notebook.
Place the new cover on the notebook, then press down on the cover in
Caution 8
several places until it clicks in place. The cover is correctly mounted when
you can run you finger along the cover and find no loose spots. The cover
should be flat all the way across.
Close the LCD panel.
9
Replace the two keyboard cover screws.
10
Replacing the keyboard cover
27