Install The Giph1; Giph1 Installation; Connect Giph1 To Lan Or Vpn Server - Toshiba Strata CIX40 Installation And Maintenance Manual

CIX40 IP Telephony

Install the GIPH1

Install the GIPH1

GIPH1 Installation

1. Ensure that the GIPH1 is installed in the cabinet and that the card stopper is secured
(see
2. Power up the system.
3. Program the CIX per the instructions in the Strata CIX Programming Manual Vol. 1,
refer to the chapter titled "IP Telephone Programming" and "Appendix A – "Application
Guide."
Note When the GIPH1 is configured for G.729a codec use and the echo cancel delay is
set to 32 ms the card will operate as follows:
When the echo cancel delay is set to 16 ms or the codec is G.711 this does not apply,
all channels are available.

Connect GIPH1 to LAN or VPN Server

1. Plug one end of a straight-through CAT5/5E/6 LAN cable into the RJ45 Ethernet port
on the GIPH1 in the CIX. (See
2. Plug the other end of the LAN cable into a LAN or server jack refer to
GIPH1 cable is a straight-through cable.
CIX40
GCTU2
GIPH1
Figure 2-1 IP LAN Connections
2-2
Figure 1-13).
• Six resources will function as G.729a with 32 ms echo cancel delay.
• Two resources will function as G.729a with 16 ms echo cancel delay.
LAN
MAS*
*Optional
Figure 1-16.)
IPT
Router
IPT
IPT
Strata CIX40 Installation and Maintenance
Figure
Strat Net IP
CIX
WAN
LIPU
or
GIPH1
or
BIPU-Q
2-1. The
7/06