General Product Description - Pacific AMX series Operation Manual

1.3

GENERAL PRODUCT DESCRIPTION

The AMX-Series Power Source is high-performance AC power conversion equipment. This series of
equipment features models with power ratings from 500 VA to 12 kVA. All systems are designed to fit into the
standard 19 inch rack. These systems are suitable for use as frequency changers as well as sophisticated test
power generators.
All systems are configured with an interchangeable controller. Controller options range from the basic manual
type (UMC-Series) to the sophisticated programmable controller (UPC-Series). The manual controller allows
the user to adjust voltage and frequency. The programmable controller, on the other hand, not only allows
control of voltage and frequency, but also allows the user to simulate virtually any transient (including sub-
cycle waveform disturbance) required for testing today's modern electronic equipment.
The standard output voltage range of the AMX-Series is 0-135 VAC
Additionally, the Models 112-AMX and 312-AMX can be configured for several output voltage ranges
between and including 0-110 VAC
higher voltages. Voltage ratios up to 2.5:1 are available.
The AMX-Series consists of the basic models listed below:
1. Model 105-AMX - 500 VA Chassis capable of 1 or 2 Phase operation. Standard
Output voltage range is 0-135 VAC
when operating in 2 Phase Mode.
2. Model 108-AMX - Same as 105-AMX, but rated for 750 VA output power.
3. Model 112-AMX - Same as 105-AMX, but rated for 1.2 kVA output power. Standard
Output voltage ranges are 0-110 VAC
2 Phase.
4. Model 125-AMX - Same as 105-AMX, but rated for 2.5 kVA output power. Standard
Output voltage range is 0-150 VAC
5. Model 140-AMX - Same as 105-AMX, but rated for 4.0 kVA output power.
6. Model 160-AMX - Same as 105-AMX, but rated for 6.0 kVA output power.
7. Model 305-AMX - 500 VA Chassis capable of 1, 2, or 3 Phase operation. Standard
Output voltage range is 0-135 VAC
Mode. In 3 Phase Mode, phase separation is fixed at 120° or programmable.
8. Model 308-AMX - Same as 305-AMX, but rated for 750 VA output power.
9. Model 312-AMX - Same as 305-AMX, but rated for 1.2 kVA output power. Standard
Output voltage ranges are 0-110 VAC
2 Phase.
10. Model 320-AMX - Same as 305-AMX, but rated for 2.25 kVA output power.
and 0-150 VAC . Optional output transformers are available to provide
l-n l-n
, 1φ or 0-270 VAC, 2 Phase. Phase separation fixed at 180°
l-n
through 0-150 VAC
l-n
, 1φ or 0-300 VAC, 2 Phase.
l-n
. Phase separation fixed at 180° when operating in 2 Phase
l-n
through 0-150 VAC
l-n
5
SECTION 1
(0-150 VAC for the Model 125-AMX).
l-n l-n
, 1φ or 0-220 VAC through 0-300 VAC,
l-n
, 1φ or 0-220 VAC through 0-300 VAC,
l-n
GENERAL