Bayliner 305 Owner's Manual page 38

Chapter 3: Propulsion & Related Systems
3. Unclip the bilge plug
swivel clip from the
cable on the end of
the oil drain hose.
NOTE: This bilge
plug assembly will
be your spare. Keep
it in the same loca-
tion as the factory
bilge plug removed
in step 1.
4. Feed the oil drain hose into the bilge area aft of the engine.
5. Thread the oil drain
hose, cable, and plug out
through the bilge drain.
6. Adjust the hose stop
clamp so that no more
than 12 inches of hose,
including the oil drain
plug, can extend out of
the bilge drain.
7. Push the oil drain hose and the
oil drain plug back into the bilge,
but leave the drain hose cable
outside of the bilge drain.
8. Repeat steps 2 through 7 on the port engine's quick oil drain assembly. The only difference being; the bilge plug
assembly, unclipped in step 3, will be used in step 9.
32
BILGE PLUG
OIL DRAIN
HOSE CABLE
OIL DRAIN
HOSE
HOSE STOP
CLAMP
BILGE DRAIN
OIL DRAIN
HOSE CABLE
OIL DRAIN HOSE
OIL DRAIN PLUG
BILGE DRAIN
OIL DRAIN HOSE CABLE
305 • Owner's Manual Supplement
SWIVEL CLIP
OIL DRAIN HOSE
OIL DRAIN PLUG