Table of Contents
Advertisement
Test Description
Cards Test Exceptions
Card tests passed
Card firmware version is incompatible
Card PCB version is incompatible
Card LED register not responding
Comms card loopback failure
Telemetry card loopback failure
Card test exception buffer full
Auto-Detection Test Exceptions
Auto-detection tests passed
Card type is unknown
Too many cards of one type
Valid Flash hardware configuration is different
from auto-detected one. Flash configuration
used.
Auto-detection test exception buffer full
Video Routing Test Exceptions
Video routing tests passed
No input video source detected
Sync not detected at correct output channel
Sync detected at wrong output channel
No sync detected at any output channel
Video routing test exception buffer full
SRB Error Exceptions
SRB slot status register
SRB error exception buffer full
Self-test Results Summary
Summary: total passes, warnings, failures
54
Siemens Building Technologies
Fire Safety & Security Products
Result Type
Total cards tested
Card with wrong
version
Card with wrong
version
Card with bad
register
Card that failed
Card that failed
None
Total rack frames
and cards detected
Card with wrong
type
Card type details
None
None
Total routes tested
None
Camera and correct
monitor
Camera and wrong
monitor
Camera
None
Register contents
None
Summary of all test
results
VisiPC self-test results
Tab. 41
NOTE
The log only shows the results of those tests that have been carried out since power-up.
Result Data
Total cards
Rack number (always 1),
Slot,
Version found
Rack number (always 1),
Slot,
Version found
Rack number (always 1),
Slot,
Type
Rack number (always 1),
Slot,
Channel
Rack number (always 1),
Slot,
Channel
None
Rack frames (always 1),
Total cards
Rack number (always 1),
Slot,
Type
Type,
Number allowed,
Number detected
None
None
Total routes tested
None
Camera,
Monitor
Camera,
Monitor
Camera
None
Rack number (always 1),
Slot,
Register value
None
Passes,
Warnings,
Failures
10.2008
Advertisement
Table of Contents
