Table of Contents
Advertisement
9.7
Controlling via the Video Management Software IVM
9.8
Clock Synchronisation
Siemens Building Technologies
Fire Safety & Security Products
The same system configuration considerations as for chapter 9.6.6 Controlling 256
cameras x 64 monitors (banked switching; not full cross point) (bridge mode A)
apply.
The same sample configuration as in Tab. 33 can be used for bridge mode B with
just the one change of:
Screen
Parameter
System
Cameras
It is possible to have a VIS3I-328 controlled from IVM (V3.4.5 or higher) using any
suitable RS232 serial port. Tab. 1 details the serial port connections. Using VisiPC
set the serial port function to Remote control input using the IVM remote control
(no Bus ID) or IVM remote (Bus ID=Keyboard) protocol as required. Set the port
parameters accordingly.
It is possible to have the VIS3I-328 system time synchronised via any suitable
RS232 or RS485 serial port. Tab. 1 details the serial port connections. The
communication protocol is compatible with Time & Frequency Solutions Message
27, as utilised in models M210 and M211. Using VisiPC set the serial port function
to Clock reference input. Set the port parameters accordingly.
Value
64
45
10.2008
Advertisement
Table of Contents
