Operation - Makita BTP140 Instruction Manual

OPERATION

10
CAUTION:
• Always insert the battery cartridge all the way until it locks in place. If you
can see the red part on the upper side of the button, it is not locked
completely. Insert it fully until the red part cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to you or someone around
you.
Impact driver operation
When driving wood screws or bolts. set the action mode changing lever to the
mark. The adjusting ring can be placed at any position.
Screwdriving
Hold the tool firmly and place the point of the driver bit in the screw head.
007411
Apply forward pressure to the tool to the extent that the bit will not slip off the
screw and turn the tool on to start operation.