Specifications - Makita BTP140 Instruction Manual

SPECIFICATIONS

Impact driver mode
Hammer drill mode
Drill mode
Screw driver mode
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..................Only for EU countries
Do not dispose of electric equipment
together
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned
compatible recycling facility.
Intended use
The tool is intended for impact screw driving in wood and
for impact drilling in brick, concrete and stone as well as
for drilling and screw driving without impact in wood,
metal, ceramic and plastic, .
2
Model
Max. fastening torque
Capacities
No load speed (min
Impacts per minute
No load speed (min
Blows per minute
Capacities
-1
No load speed (min )
Capacities
No load speed (min
Capacities
Overall length
Net weight
Rated voltage
END001-1
with household
equipment and
to an environmentally
Machine screw
Standard bolt
High tensile bolt
-1
)
-1
)
Concrete
High (2)
Low (1)
Steel
Wood
-1
)
Machine screw
For Model BTP130
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 100 dB (A)
Uncertainty: 3 dB
– Wear ear protection. –
waste
The typical weighted root mean square acceleration
value is 9 m/s
These values have been obtained according to EN60745.
its
For Model BTP140
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 100 dB (A)
Uncertainty: 3 dB
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 8 m/s
These values have been obtained according to EN60745.
BTP130
135 N•m
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,400
0 - 3,200
0 - 2,400
0 - 28,800
8 mm
0 - 2,400
0 - 700
10 mm
21 mm
0 - 2,400
M4
186 mm
1.7 kg
D.C.14.4 V
2
.
2
.
BTP140
145 N•m
0 - 2,300
0 - 2,300
0 - 27,600
0 - 2,300
0 -2,300
1.8 kg
D.C.18 V