TRENDnet User's Guide
Setup Your Camera with CD
1. Insert the Installation CD-ROM into your computer's CD-ROM drive to
initiate the Auto-Run program. Choose your preferred language and then
click the Install Camera.
2. Write down the MAC Address of the camera.
© Copyright 2014 TRENDnet. All Rights Reserved.
3. Connect a PoE capable network cable to the camera's network port and
then to a PoE switch and wait for the camera to boot up. Click Next when
you are done.
* A power adapter (sold separately) can be used instead of PoE switch.
4. Wait while the utility is searches for the camera.
TV-IP320PI
7