Table of Contents
Advertisement
TRENDnet User's Guide
Maintenance
You can restart, load camera settings and upgrade the camera firmware on
this page.
Reboot
Reboot: Click this button to reboot this camera.
Reset
Reset: Reset all camera parameters, except the IP parameters
and user information.
Default: Load complete factory default to the camera.
© Copyright 2014 TRENDnet. All Rights Reserved.
Inport Config. File
Config File: To load previously saved settings, click Browse to find the
configuration file and then click Import.
Status: Shows the status in loading configuration file.
Export Config. File
Export: Click Export to download configuration file. The file will
be downloaded to the Download folder by default.
Remote Upgrade
Firmware: Click Browse to find the latest firmware and then click
Upgrade.
Status: Shows the status in firmware upgrade.
TRENDnet may periodically release firmware upgrades that might add
features or fix problems associated with your TRENDnet model and version.
To find out if there is a firmware upgrade available for your device, please
check your TRENDnet model and version using the link.
http://www.trendnet.com/downloads/
1. If a firmware upgrade is available, download the firmware to your
computer.
2. Unzip the file to a folder on your computer.
3.
Read the firmware upgrade instruction for specific version update
information.
4. Log into the TV-IP320PI.
5. Getting to this Maintenance page to upgrade firmware.
TV-IP320PI
30
Hide quick links:
Advertisement
Table of Contents
