TRENDnet TV-IP320PI User Manual page 53

TRENDnet User's Guide
Appendix
Direct video access - RTSP
To access the video directly through RTSP, just visit the camera IP address on
port 554 by default. For example: 192.168.10.30:554 use the admin or user
password the login.
Direct video access - HTTP
To access the video directly through http, just visit the camera IP address with
"/Streaming/channels/1/httpPreview" as affix on port 80. For example:
192.168.10.30/Streaming/channels/1/httpPreview use the admin or user
password the login.
Get better video stream on TRENDnet View Pro
The TRENDnet View Pro is installing the TV-IP320PI sub stream video by
default for better connectivity. If your TRENDnet View Pro server is located
on the same local network with your camera and you have good enough
bandwidth, you can change the setting on TRENDnet View Pro to get the main
stream RTSP video with better picture quality. The default main stream video
bitrate is 2,048Kbps.
© Copyright 2014 TRENDnet. All Rights Reserved.
To change the setting, browse to your camera, then right click on the camera
name. Click Camera Setup Wizard ... to invoke the setup window.
Click Next to setup the camera.
TV-IP320PI
53