On Screen Display Settings - TRENDnet TV-IP320PI User Manual

TRENDnet User's Guide
Image adjustments
Back Light Back light compensation: Setup a fixed light source
Compensation position to compensate and adjust the image in the
and dark.
Digital Wide- Choose the area that you want to enhance (dark area,
Dynamic-Range: not light source).
Note: By default, the D-WDR is enabled. Please disable D-
WDR to set up back light compensation.
D-WDR: Digital Wide Dynamic Range compensates for
the dark area dynamically.

D-WDR Level: The level of compensation. Range:
0-100%, default: 20%.
White Balance:
Digital Noise Choose the mode of noise reduction.
Reduction:
Normal Mode
Noise Reduction Level: Adjust the effect of digital
noise reduction. Range: 0-100%, default : 100%
Expert Mode
Space DNR Level: Adjust the special digital noise
reduction with adjacent pixels. Change the range (0-
100%) to change the adjacency effect, default : 50%
Time DNR Level: Adjust the 3D digital noise reduction.
Compare and reduce noise between video frames.
Range: 0-100%, default : 100%
Click Reset to reset the display adjustments
© Copyright 2014 TRENDnet. All Rights Reserved.
Choose a color
temperature as the white
color and compensate the
color on the whole image.

On Screen Display Settings

Display the camera name and the time the video is shooting on the screen
Display Check this box to display the product name that was
Name: setup in the device settings (refer to page 26 Device
Settings to change the device name.)
Display Date: Check this box to display system time.
Display Week: Check this box to display time of the week.
Time Format: Select 12 or 24-hour time format.
Date Format: Select the date format
Display Mode: Choose how the text will show on the screen.
OSD Size: Select the text size from 16 to 64 or adjusted by
screen size automatically.
Move the red box to position the text. Click Save to save the changes.
TV-IP320PI
40