Kanguru BioAES User Manual page 14

If the registration was successful then the selected finger tip will be highlighted in a
neon green color and you will receive a message in the top right info box noting that
the enrollment was a success.
In order to register your fingerprint in a readable way, please make sure that you
swipe your finger over the fingerprint sensor in the same way (orientation) at least 3
times. The Kanguru BioAES should be lying on a flat surface (connected via the
supplied USB extension cable) so you can swipe your finger aligned to the fingerprint
sensor. Swiping your finger at a too steep angle against the sensor will lead to an
unreadable result. Also, do not apply too much pressure to the sensor and please
make sure that your fingers are dry and clean. It should take you about 1 second to
swipe your finger from the top of the drive to the bottom.
The fingerprint enrollment tutorial shows a visual demonstration of how to register a
fingerprint. To access the fingerprint enrollment tutorial, click the "See fingerprint
enrollment tutorial" button located on the right sign of the 'Enroll Fingerprint'
screen.
13