9.2.3.
Fingerprint Registration
In order to use your Kanguru BioAES you must register at least one fingerprint. To do
this, select the finger that you want to use by selecting a gray fingertip with your
mouse cursor. Also you can use the number keys to select a finger instead of your
mouse. When the finger is selected, the finger tip will flash dark gray and light gray.
After choosing the finger for registration, you will receive a message asking you to
swipe that finger over the fingerprint sensor. Swipe your finger over the sensor until
you receive a message saying that the fingerprint registration was successfully
completed. For the registration to be valid, you have to enter the same finger at least
three times in a readable way. The Kanguru BioAES can store up to 10 fingerprints.
12