Operating The Dynamic Massage Sequencer; Dynamic L.e.d. Light (On Certain Models) - Dimension One Spas Spa Owner's Manual

Operating the Dynamic Massage Sequencer

Dynamic L.E.D. Light (On Certain Models)

If your spa is equipped with the Dynamic L.E.D. Light feature, you control the speed of the color
sequence by pushing the Light Button:
Push Light once to Start: Color Fade Fast (cycle all colors twice per minute)
Off for 1 second and back On: Color Hold (keep the current color)
Off for 1 second and back On: Color Fade Slow (cycle all colors once per minute)
Off for 1 second and back On: Color Hold (keep the current color)
Off for 1 second and back On: Return to Color Fade Fast and repeat cycle
Turning the Light off for more than five seconds, then on, resets the sequence to Start.
Dimension One Spas – Reflections Owner's Manual
Push the JETS Button to turn on the spa pump.
Select a sequence by pushing the SEQUENCE Button until you find the one
you want (the lights in the Human Figure show the zones that will be
active). Press the BEGIN/PAUSE Button to begin the massage.
SEQUENCE #1 steps through each individual zone one at a time, from
zone A through F, then reverses the sequence. The time between zones is
set using the Speed Button.
SEQUENCE #2 activates all zones at once, then deactivates individual
zones one at a time, from A through F. Then it reverses that sequence.
The time between zones is set using the Speed Button.
SEQUENCE #3 activates alternate groups of zones. It activates Zones A, C,
and E all at once, then switches to Zones B, D, and F. The time between
zone groups is set using the Speed Button.
SEQUENCE #4 steps through each individual zone one at a time, from
zone A through F, then it starts over in groups of two zones – activating
zones A and B, then zones B and C, etc. The time between zones is set
using the Speed Button.
SEQUENCE #5 starts with Zone A and adds new zones one at a time until
all zones are active. Then it reverses the sequence by removing zones
one at a time until all zones are inactive. The time between zones is set
using the Speed Button.
SEQUENCE #6 activates random pairs of zones at one time, starting with
adjacent zones, (A and B, then B and C, etc.), then opposite zones (A
and F, then B and F, etc.), and finally the middle zones (B and E, then C
and D, etc.). The time between zone groups is set using the Speed Button.
26