1. Manuals
  2. Brands
  3. Dimension One Spas Manuals
  4. Hot Tub
  5. 01510-1030E Rev A
  6. Owner's installation manual

Dimension One Spas 01510-1030E Rev A Owner's Installation Manual

Dimension one spas sonic immersion system owner's manual and dealer's installation guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Dimension One Spas 01510-1030E Rev A

Summary of Contents for Dimension One Spas 01510-1030E Rev A

  • Page 3: Table Of Contents

    Export Sonic Immersion System OWNER’S MANUAL ... 1 EATURES OF THE CD P SING THE LAYER DEALER INSTALLATION ... 2 ETTING EADY Overview of the Installation... 3 Required Tools... 3 Parts List... 5 EMOVING ANELS Remove Equipment Compartment Panel ... 8 Remove the Sub Woofer Compartment Panel ...
  • Page 4 Export Sonic Immersion System...

  • Page 5: Owner's Manual

    Export Sonic Immersion System Dealer Owners Manual Owner’s Manual Features of the Sonic Immersion • Dealer installation allows you to add to any Sonic Immersion System ready Dimension One Spa in stock • Patented planar magnetic speaker technology (1/4” [6.35 mm] thick) that generates unparalleled sound quality even in the harshest environmental conditions •...

  • Page 6: Dealer Installation

    Export Sonic Immersion System Dealer Installation Guide Dealer Installation This section intended for use by authorized dealer personnel only...

  • Page 7: Getting Ready To Start

    Export Sonic Immersion System Dealer Installation Guide Getting Ready To Start The Sonic Immersion System can only be installed on spas with the following serial numbers. Table 1 Sonic Immersion System Ready Spas Model Aurora HP Aurora II Aurora XLT Caliente HP Californian Chairman...
  • Page 8 Export Sonic Immersion System Dealer Installation Guide Table 2 Required Tools Electric drill 1 ½ inch (3.8 mm) hole saw ¼ inch (6.35 mm) drill bit 3/8 inch (9.5 mm) drill bit Saber Saw Phillips screwdriver Tape (masking, electrical, duct, or packaging) ½...

  • Page 9: Parts List

    Export Sonic Immersion System Dealer Installation Guide Parts List You should have received the following parts in the Sonic Immersion System installation kit: Medium Size Needle Nose Pliers Wire Stripper Utility Knife 5/16” (7.94 mm) Nut Driver or wrench Six inch (15.24 cm) square Stapler and Staples Straight Edge Safety Glasses...
  • Page 10 Export Sonic Immersion System Dealer Installation Guide Description This document Amplifier Coarse- Threaded Drywall Screws Template Power Supply Harness Power, supply, stereo Main Harness Speaker, lead Speakers, Satellite Table 3 Parts List Item Number 01510- 1030 01564-08 01051-06 Doc 74- Rev A 01564-19 01564-01...
  • Page 11 Export Sonic Immersion System Dealer Installation Guide Stereo Sub-woofer sub assembly Stereo cover, marine Dual pole antenna Preamp stereo, cable Power supply screw, sheet metal, SS, PH Marine cover screws, #8 x ½” (1.3 cm) SS Truss Head Cable Ty, 4” (10.2 cm) black 01564-03 01564-09...

  • Page 12: Removing Panels

    Export Sonic Immersion System Dealer Installation Guide Cable Ty Mount Removing Panels In order to install the system up to three panels must be removed from the spa: the equipment compartment panel, the panel where the sub woofer is installed, and the panel where the Satellite Speakers are to be installed.
  • Page 13 Export Sonic Immersion System Dealer Installation Guide Figure 1. Top Side Control The Lower Control is located in the equipment compartment behind the spa panel below the Main Top Side Control. Use the screwdriver to remove the equipment compartment panel screws, Figure 2. Figure 2.

  • Page 14: Remove The Sub Woofer Compartment Panel

    Export Sonic Immersion System Dealer Installation Guide Note Remove the Sub Woofer Compartment Panel The installation location of the sub woofer compartment will vary from one spa model to another. Use Table 4 to locate the compartment on your spa. First, stand in front of the spa facing the Top Side Control (at the 6 o’clock position, see below) and then refer to Table 4 below.
  • Page 15 Export Sonic Immersion System Dealer Installation Guide Sub-Woofer Installation Locator Top Side Control Table 4 Model List Model and Number Aurora II and Chairman Chairman II and Aurora XLT Diplomat, Californian Nautilus Location of Installation Top Side Control Top Side Control Top Side Control Top Side Control...
  • Page 16 Export Sonic Immersion System Dealer Installation Guide Caliente HP, Triad II, Aurora HP, and Triad Use the screwdriver to remove the spa panel screws, Figure 3. Figure 3. Equipment Compartment Panel Screws Note Top Side Control The number of screws to be removed will depend on the model of spa.

  • Page 17: Installing The Sub Woofer Compartment

    Export Sonic Immersion System Dealer Installation Guide Installing the Sub Woofer Compartment The installation of the sub woofer compartment consists of removing the panel, removing the paper cover, exposing the plug, removing the plug, and installing the sub woofer compartment. If you have a spa with wood siding you may skip to Step 2.
  • Page 18 Export Sonic Immersion System Dealer Installation Guide Note Once the plug is exposed, Figure 6, use a screwdriver to punch holes in the foam large enough to insert your hands and pull the plug out of the spa, Figure 7. Note The photograph Figure 5 may not look like your spa, refer to Table 4.
  • Page 19 Export Sonic Immersion System Dealer Installation Guide Figure 7. Removing Plug Use a medium size pair of needle nose pliers to remove the large staples in the bottom rail where the plug was removed. Remove all remnants of the plastic bag inside the compartment where the plug was removed.
  • Page 20 Export Sonic Immersion System Dealer Installation Guide Electrical Conduit Before Trimming Figure 8. Electrical Conduit Using a non-ratcheting PVC pipe cutter, trim the electrical conduit flush with the foam wall, Figure 9. Electrical Conduit After Trimming Figure 9. Conduit After Trimming...
  • Page 21 Export Sonic Immersion System Dealer Installation Guide Locate the sub woofer sub assembly (P/N 01564-09). Locate the spot on the compartment that matches the location of the conduit in the spa. Using a1½ inch (3.8 cm) hole saw, drill a hole for the conduit, Figure 10. Figure 10.
  • Page 22 Export Sonic Immersion System Dealer Installation Guide Bottom Edge of Frame Figure 11. Edge of Frame A properly positioned sub woofer compartment is shown in Figure 12. Figure 12. Properly Installed Sub-Woofer...

  • Page 23: Pre Wiring From Equipment Compartment To Sub Woofer Compartment

    Export Sonic Immersion System Dealer Installation Guide 10. Once you are satisfied that the compartment fits properly, secure the compartment to the frame, Figure 13, with 5 1“ (2.54 cm) coarse-threaded drywall screws (P/N 01051-06 provided in hardware package). Figure 13. Attaching to Frame Pre Wiring from Equipment Compartment to Sub Woofer Compartment...
  • Page 24 Export Sonic Immersion System Dealer Installation Guide Figure 14. Fish Tape in Equipment Compartment Now locate the amplifier cables (two white and two red RCA connectors on both ends, P/N 01570-24). Locate the three- branched harness assembly (P/N 01564-20). One branch will be considerably longer than the other two.
  • Page 25 Export Sonic Immersion System Dealer Installation Guide Apply a small amount of fish tape lubricant to a cloth and then run the cables through the rag to give them a light coating of lubricant, Figure 16. Figure 16. Applying Lubricant to Cables Now pull them through the conduit from the equipment compartment to the sub-woofer compartment, Figure 17.
  • Page 26 Export Sonic Immersion System Dealer Installation Guide woofer compartment, the wires and cables can be connected to the amplifier in the sub-woofer compartment. You may want to trim off some of the harness because it could be longer than necessary. Make sure that when the wires are connected to the amplifier that the amplifier can be moved out to make adjustments.
  • Page 27 Export Sonic Immersion System Dealer Installation Guide 1. Speaker Output Terminals. 2. Power Input Terminals 3. Red Wire 4. Blue Wire 5. Black Wire Figure 19. Connecting Wires for Power Input Locate the wire coming from the sub-woofer. This wire is covered with clear insulator.
  • Page 28 Export Sonic Immersion System Dealer Installation Guide to red and white terminals on left, connect Channel 2 (sub- woofer speaker) to red and white terminals on right, Figures 21 and 22. 1. Line Level Input 2. Mode Control 3. Bass Boost Control 4. HP/LP Crossover Control 5.

  • Page 29: Installation Of Power Supply

    Export Sonic Immersion System Dealer Installation Guide 12. Set BASS BOOST CH1 and CH 2 to the MIN position. 13. Set HIGH PASS CH 1 and CH 2 to the 200 HZ positions. 14. Set CH 1 to HP position and CH 2 to LP position. Installation of Power Supply Pre-Wire Power Supply Locate the power supply kit that contains the power supply (P/N...
  • Page 30 Export Sonic Immersion System Dealer Installation Guide Green 2. Yellow 3. Red 4. Blue 5. Black 6. Row 3 Amplifier 7. Row 2 Stereo 8. Row 1 120 V Supply 9. Black Figure 24. Connector Wire Configuration Connect the wires from Row 1 (120 V Supply) to the power supply as follows: black wire to the terminal marked ”AC-L”, the white wire to terminal marked “AC-N”, and the green wire to the terminal marked “FG”, Figure 25.
  • Page 31 Export Sonic Immersion System Dealer Installation Guide Connect the wires coming from Row 2 (Stereo +12 V Supply) as follows: (Figure 26) yellow and red wires to terminal marked “DC+” and the black wire to terminal marked “DC- “. Black Wire 2. Red and Yellow Wires Figure 26.

  • Page 32: Installing Power Supply In Equipment Compartment

    Export Sonic Immersion System Dealer Installation Guide Installing Power Supply in Equipment Compartment Turn the power supply so that you can see the Voltage Selector Switch, see Figure 28, and place the switch in the correct position (115V for UL and CSA spas or 240V for CE spas) for your location.
  • Page 33 Export Sonic Immersion System Dealer Installation Guide 1. Location of Upper and Lower Screw Holes Figure 29. Location of Attachment Holes on Power Supply Locate the connector on the harness assembly that matches the one that you just installed on the power supply and connect them together, Figure 30.

  • Page 34: Wiring The Power Supply

    Export Sonic Immersion System Dealer Installation Guide Wiring the Power Supply Locate the end of the harness that has a green, black, and white wire (with connectors). Remove lower control box cover. Insert these wires through the hole in the bottom of the lower control box, Figure 31.
  • Page 35 Export Sonic Immersion System Dealer Installation Guide Figure 32. Removing Nut from Ground Terminal Now place the green ground wire that you just inserted into the lower control box over the screw, replace 5/16” (7.9 mm) nut, and secure with 5/16”(7.9 mm) nut driver or wrench.

  • Page 36: Determining Location Of Cd Weather Cover

    Export Sonic Immersion System Dealer Installation Guide Determining Location of CD Weather Cover The installation location of the CD Player Weather Cover (P/N 01564-04) depends on the model of the spa. The following steps will guide you through the process of determining the installation location. Refer to Figure 33.

  • Page 37: Cutting Panel Hole For Cd Player Door Assembly

    Export Sonic Immersion System Dealer Installation Guide Note Use the measurements determined in Step 1 and insert them into the following formula: Distance A = ______ Distance B = _______ A + 1” (2.54 cm) = Vertical Position (VP) _________ B + ¾”...
  • Page 38 Export Sonic Immersion System Dealer Installation Guide 1. Bottom of Panel 2. Panel Lay Face Up 3. Top of Panel Figure 34. Measuring Vertical Distance Using measurement obtained for Horizontal Position (HP), measure from side of panel, see Figure 35, and mark spot with a fine point marker.
  • Page 39 Export Sonic Immersion System Dealer Installation Guide The point where these two lines intersect is the upper right corner of the template (P/N Doc 74 Rev A). Align the upper right corner of the template with the mark on the panel. Use a center punch to mark the spot, Figure 36. Figure 36.
  • Page 40 Export Sonic Immersion System Dealer Installation Guide Using a 3/8” (9.5 mm) bit, drill holes in two corners of the rectangle, Figure 38. Make certain that the holes are within the lines. Using a center punch to mark the drilling centers will prevent the drill bit from wandering.

  • Page 41: Installation Of Cd Player Door And Bezel

    Export Sonic Immersion System Dealer Installation Guide Installation of CD Player Door and Bezel If the bezel is not removed from the door assembly (P/N 01564-04), remove it by pulling from the bottom of the bezel and then proceed as follows, see Figure 40: Figure 40.

  • Page 42: Installation Of Panel And Cd Player

    Export Sonic Immersion System Dealer Installation Guide Figure 41. Door Assembly Installed Reattach the bezel. Locate the mounting sleeve supplied with the CD player and refer to the CD Player Owner’s manual for directions on how to install this sleeve. Once the CD player mounting sleeve is installed in the panel, proceed to the following paragraph.
  • Page 43 Export Sonic Immersion System Dealer Installation Guide Figure 42. Door Assembly Ready for CD Player Reattach panel to spa. Connect antenna, main harness and amplifier to CD player as described in CD player owner’s manual. Connect power supply cable (long branch of main harness) to power supply connector on CD player.

  • Page 44: Installing The Satellite Speakers

    Export Sonic Immersion System Dealer Installation Guide Installing the Satellite Speakers Locate the panel where you will install the speakers, Figure 43. Figure 43. Typical Satellite Speaker Installation Take the hinge mounting bracket connected to the speaker (P/N 01564-14) and place it on the panel with the top triangular portion of the hinge butting up against the lower edge of the overhanging spa lip.
  • Page 45 Export Sonic Immersion System Dealer Installation Guide 1. Caps in Place Figure 44. Protective Caps in Place...

  • Page 46: Installing The Satellite Speaker Wires

    Export Sonic Immersion System Dealer Installation Guide Installing the Satellite Speaker Wires Remove the panel where you just finished installing the speakers. Locate two speaker wire sets (P/N 01564-21). The wires have clear insulator with a silver and copper wire and female connectors on one end.
  • Page 47 Export Sonic Immersion System Dealer Installation Guide When pushed all the way up under the lip, the wire or cable will rest safely on the lip of the spa wall 2. Cable or Wire . 3. Spa Shell’s Lip 4. Wooden Ruler or Paint Stir Stick 5. Install Wire or Cable Under the Spa Shell’s Lip Figure 46.
  • Page 48 Export Sonic Immersion System Dealer Installation Guide Continue installing the wire until you reach the panel where the sub-woofer compartment has been installed. Now use the Cable Tyes and Cable Mounts to attach the wire to the wood until you reach the sub woofer compartment, Figure 47. 1.
  • Page 49 Export Sonic Immersion System Dealer Installation Guide Copper Wire 2. Copper Wire 3. Silver Wire 4. Silver Wire Figure 48. Connecting Satellite Speaker Wires to Amplifier Now connect the wires coming from the sub-woofer compartment to the satellite speakers. The wires from the speakers have male connectors and the wires coming from the sub-woofer have female connectors, Figure 49.
  • Page 50 Export Sonic Immersion System Dealer Installation Guide Place the panel back on the spa and secure with screws. The finished installation should appear as in the pictures shown in Figure 50. Figure 50. Completed Speaker Installation...

  • Page 51: Securing The Amplifier

    Export Sonic Immersion System Dealer Installation Guide Securing the Amplifier Now that the speakers have been installed and the amplifier has been adjusted it can be secured to the frame, Figure 51, with dry wall screws supplied in the kit (P/N 01051-06). Figure 51.
  • Page 54 Part No. 01510-1030E Rev A  2002 Dimension One Spas...

This manual is also suitable for:

Sonic immersion system

Table of Contents