Cisco 11500 Series Hardware Installation Manual page 66

Cabling the CSS 11503 and CSS 11506 Modules
•
•
Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-8
Switch Module (SM). An SM provides connectivity among the SCM and
IOMs.
The CSS 11503 has a single integrated SM. A single SM has an aggregate
–
throughput of 20 Gbps.
The CSS 11506 has two removable SMs that share the switching
–
functions. Two SMs provide 40 Gbps aggregate throughput. As
implemented in WebNS 5.10 and greater, if one SM fails, the CSS
reboots and continues to operate through the other SM.
Two slots in the CSS 11503 and five slots in the CSS 11506 are configurable
with:
Fast Ethernet Modules that provide either 8 or 16 auto-sensing
–
10/100-Mbps Ethernet (
Gigabit Ethernet Modules that provide up to two 1000-Mbps Ethernet
–
SFP GBICs; 1000BASE-SX or LX with LC-type connectors, or
1000BASE-T with RJ-45 connectors.
A Session Accelerator Module (SAM) that provides a cost-effective way
–
to add flow performance when additional connectivity is not required.
Using the same flow setup and forwarding processors as the I/O modules,
it provides the flexibility to optimize the CSS for port density and
performance.
A Secure Socket Layer (SSL) module that functions as an SSL server by
–
adding security services between the Web browsers (the client) and
HTTP servers and backend SSL servers. The SSL module is responsible
for all user authentication, public/private key generation, certificate
management, and packet encryption and decryption functions between
the client and the server. Each SSL module terminates SSL connections
received from a client. The CSS 11503 supports a maximum of two SSL
modules and the CSS 11506 supports a maximum of five SSL modules.
An SSL compression (SSL-C) module with HTTP data compression
capability is also available. In addition to performing SSL functions, the
SSL-C module contains a special chipset optimized for performing
HTTP text compression. You can use SSL-C modules in place of or along
with existing SSL modules.
For information on SSL commands and functions, and configuring HTTP
compression, refer to the Cisco Content Services Switch SSL
Configuration Guide.
Chapter 2 Cabling and Troubleshooting the CSS
10BASE-T/100BASE-TX
) RJ-45 ports.
78-17231-01