Troubleshooting The Css Power Supply; Troubleshooting The Css 11501 Power Supply; Troubleshooting The Css 11503 Power Supply; Troubleshooting The Css 11506 Power Supply - Cisco 11500 Series Hardware Installation Manual

Chapter 2 Cabling and Troubleshooting the CSS

Troubleshooting the CSS Power Supply

Troubleshooting the CSS 11501 Power Supply

Note
78-17231-01
The following sections discuss:
Troubleshooting the CSS 11501 Power Supply
•

Troubleshooting the CSS 11503 Power Supply

•

Troubleshooting the CSS 11506 Power Supply

•
The CSS 11501 has one power supply as part of its chassis. When you power on
the CSS, the indications of a successful power up are that it boots properly and
become operational, and displays the following log message:
CHMGR: All power supplies are present (1).
This message is displayed only if the logging level is set to the Info-6 or Debug-7
level.
If you power on the CSS and it does not boot as indicated by the Status LEDs,
either:
There is no power to the power supply. Ensure that the CSS 11501 has power.
•
Check the power switch, power cord, and power source.
The power supply failed, obtain technical assistance.
•
Cisco 11500 Series Content Services Switch Hardware Installation Guide
Troubleshooting the CSS Hardware Components
2-45