Honda ARX1500T3DX Owner's Manual page 92

GPS Mode
12.To enter the displayed tenths of a second
in the system, tap (do not hold) the WP
SET button until LON appears above the
WP mark. The compass direction indicator
will flash Eastern Longitude (12) or
Western Longitude (13). (To switch to the
other hemisphere, press either the + (plus)
button or – (minus) button.)
(12) Eastern Longitude
(13) Western Longitude
13.To enter the longitude coordinates, follow
the same procedure used in steps 6-11.
84
GPScape System
(12)
(13)
To Correct Input:
Push the MODE button (14). This reverses
the sequence so you can back up and make a
correction.
(14)
(14) MODE button
Once the 1/10 second longitude entry is
completed, you can no longer back up in the
sequence to make a correction.
To Change the Coordinates for an Existing
Waypoint Number:
Follow steps 1-4 under Advance Waypoint
Selection (page 81) and "overwrite" your
previous waypoint.