Controls & Features
Bilge Drain Plugs
The bilge drain plugs (1) are used to drain
water from the engine compartment. This
operation should be performed with your
PWC out of the water and the engine off. The
plugs must be secured before returning your
PWC to the water to avoid possible engine
damage.
REAR
(A)
(B)
(1) bilge drain plugs
(A) open
(B) close
54
Instruments & Controls
Flushing Connector
The flushing connector (1) is used for
attaching a garden hose to flush the engine
cooling system (page 193).
REAR
(1)
(1) flushing connector
(1)