Table of Contents
Advertisement
The following table describes the parameters of this page:
Field
ACS
URL
User Name
Password
Periodic Inform Enable
Periodic Inform
Interval
Connection Request
User Name
Password
Debug
Show Message
CPE sends GetRPC
Skip MReboot
Delay
Auto-Execution
3.5.6 ACL
Choose Service > ACL, the page shown in the following figure appears. In this
page, you can permit the data packets from LAN or WAN to access the router. You
The URL of the auto-configuration server to
connect to.
The user name for logging in to the ACS.
The password for logging in to the ACS.
Select Enable to periodically connect to the
ACS to check whether the configuration
updates.
Specify the amount of time between
connections to ACS.
The connection usrname provided by TR-069
service.
The connection password provided by TR-069
service.
Select Enable to display ACS SOAP messages
on the serial console.
Select Enbale, the router contacts the ACS to
obtain configuration updates.
Specify whether to send an MReboot event
code in the inform message.
Specify whether to start the TR-069 program
after a short delay.
Specify whether to automatically start the
TR-069 after the router is powered on.
- 66 -
Description
Advertisement
Table of Contents
