Leds And Interfaces; Front Panel - SONIQ CWR150NS-AU Instruction Manual

designed for heat dissipation to ensure that the device works normally. Do
not cover these heat dissipation holes.
Do not put this device close to a place where a heat source exists or high
temperature occurs. Avoid the device from direct sunshine.
Do not put this device close to a place where it is over damp or watery. Do
not spill any fluid on this device.
Do not connect this device to any PCs or electronic products, unless our
customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.
Do not place this device on an unstable surface or support.

1.3 LEDs and Interfaces

Front Panel

The following table describes the LEDs of the device:
LED Color
Power Green
Red
ADSL Green
Internet Green
Status Description
On The
initialization is normal.
Off The power is off.
On The device is self-testing or self-testing is
failed.
Slow No signal is detected.
Blinks
Fast The device is handshaking with the physical
Blinks layer of the office.
On The device is connected to the physical layer
of the office.
On The Internet connection is normal in the
- 4 -
device is powered on and the