Table of Contents
Advertisement
Field
Idle Time (s)
Bridge
AC-Name
Service-Name
802.1q
Apply Changes
Return
Reset
Source Mac address
MAC Clone
3.4.2.2 ATM Setting
Click ATM Setting in the left pane, the page shown in the following figure appears.
In this page, you can configure the parameters of the ATM, including QoS, PCR,
CDVT, SCR and MBS.
If choose Connect on Demand, you need to
enter the idle timeout time. Within the preset
minutes, if the router does not detect the flow of
the user continuously, the router automatically
disconnects the PPPoE connection.
You can select Bridged Ethernet, Bridged
PPPoE, or Disable Bridge.
The accessed equipment type.
The service name.
You can select Disable or Enable. After enable
it, you need to enter the VLAN ID. The value
ranges from 1 to 4095.
Click it to save the settings of this page
temporarily.
Click it to return to the Channel Configuration
page.
Click it to refresh this page.
The MAC address you want to clone.
Click it to enable the MAC Clone function with
the MAC address that is configured.
- 39 -
Description
Advertisement
Table of Contents
