Easy-Pack Rear Sill Protector - Mercedes-Benz E-Class Operator's Manual

Stowage areas
314
Installing and removing the folding
cargo compartment floor
120° position
Remove the combined cargo cover and net
X
( page 308).
Y
To remove: move EASY-PACK folding
X
luggage-compartment floor : into the
120° position and lift it upwards.
To install: push EASY-PACK folding
X
luggage-compartment floor : to the stop,
move it into the 120° position and make
sure it engages audibly.
Pull EASY-PACK folding luggage-
X
compartment floor : forwards.

EASY-PACK rear sill protector

(Wagon)
! Before closing the tailgate, refasten the
EASY-PACK rear sill protector on the
underside of the EASY-PACK folding
luggage-compartment floor.
The EASY-PACK rear sill protector could
otherwise be damaged.
The EASY-PACK rear sill protector is attached
to the underside of the EASY-PACK folding
cargo compartment floor by means of
magnets. It is designed to prevent clothing
becoming stained and the paintwork being
scratched when loading.
Open the EASY-PACK folding luggage-
X
compartment floor (
Use tab ; to detach EASY-PACK rear sill
X
protector : from the magnets and place
it over the loading sill.
Close the EASY-PACK folding cargo
X
compartment floor.
Roof carrier
Important safety notes
G
WARNING
When you load the roof, the center of gravity
of the vehicle rises and the driving
characteristics change. If you exceed the
maximum roof load, the driving
characteristics, as well as steering and
braking, will be greatly impaired. There is a
risk of an accident.
Never exceed the maximum roof load and
adjust your driving style.
! Mercedes-Benz recommends that you
only use roof carriers that have been tested
and approved for Mercedes-Benz vehicles.
This helps to prevent damage to the
vehicle.
page 313).
Y