Manual Drive Program - Mercedes-Benz E-Class Operator's Manual

Automatic transmission
174
i
As well as this permanent drive program
M, you can also activate temporary drive
program M(
Y
Switching on the manual drive program
Turn the drive program selector
X
( page 171) until M appears in the
Y
multifunction display.
The indicator M on the drive program
selector lights up in red.
The manual drive program is only available for
AMG vehicles.
Manual drive program M is different from
drive programs S and S+ with regard to
spontaneity, responsiveness and
smoothness of gear changes.
Manual drive program M can be selected
using the drive program selector. In manual
drive program M, you can change gear using
the steering wheel paddle shifters if the
transmission is in position D. The gear
currently selected and engaged is shown in
the multifunction display.
Upshifting
! In manual drive program M, the automatic
transmission does not shift up
automatically even when the engine
limiting speed for the current gear is
reached. When the engine limiting speed is
reached, the fuel supply is cut to prevent
the engine from overrevving. Always make
sure that the engine speed does not reach
the red area of the tachometer. There is
otherwise a risk of engine damage.
Pull the right-hand steering wheel paddle
X
shifter.
The automatic transmission shifts up to the
next gear.
page 172).
Gear indicator
:
Upshift indicator
;
Before the engine speed reaches the red area,
an upshift indicator will be shown in the
multifunction display.
Downshifting
Pull the left-hand steering wheel paddle
X
shifter.
The automatic transmission shifts down to
the next gear.
i
If you brake the vehicle or stop without
shifting down, the automatic transmission
will shift down to a gear that will allow the
vehicle to accelerate or pull away again.
Kickdown
i
Kickdown is not possible in manual drive
program M.
Switching off the manual drive program
Turn the drive program selector
X
( page 171) until C, S or S+ appears in the
Y
multifunction display.