Indicator And Warning Lamps In The Instrument Cluster; Warning Lamp - Mercedes-Benz E-Class Operator's Manual

Indicator and warning lamps in the instrument cluster

Display messages
Â
Key Not Detected Key Not Detected
(white display
message)
Â
Key Detected in Key Detected in
Vehicle Vehicle
Â
Remove 'Start' Remove 'Start'
Button and Insert Button and Insert
Key Key
Â
Close Doors to Close Doors to
Lock Vehicle Lock Vehicle
Indicator and warning lamps in the instrument cluster
Safety
Seat belts
Problem
ü
After starting the
engine, the red seat
belt warning lamp lights
up for 6 seconds.
ü
After starting the
engine, the red seat
belt warning lamp lights
up. In addition, a
warning tone sounds
for up to six seconds.
Possible causes/consequences and M M Solutions
The KEYLESS-GO key cannot be detected at present.
Change the location of the SmartKey with the KEYLESS-GO
X
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
Operate the vehicle with the SmartKey in the ignition lock.
X
The KEYLESS-GO key has been detected inside the vehicle during
locking.
Remove the KEYLESS-GO key from the vehicle.
X
The KEYLESS-GO key can continuously not be detected.
KEYLESS-GO is temporarily malfunctioning or is defective. A
warning tone also sounds.
Insert the SmartKey into the ignition lock and turn it to the
X
desired position.
Visit a qualified specialist workshop.
X
At least one door is open. A warning tone also sounds.
Close all doors and lock the vehicle again.
X
Possible causes/consequences and M M Solutions
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
Fasten your seat belt (
X
The driver's seat belt is not fastened.
Fasten your seat belt (
X
The warning tone ceases.
page 56).
Y
page 56).
Y
285
Z