Mercedes-Benz E-Class Operator's Manual page 117

Hook the seat belts into retainers =.
X
Pull release handle ; and fold the folding
X
bench seat cushion into the sitting
position.
Push down the seat cushion until the
X
backrest engages fully.
Fold the head restraints upwards.
X
Installing and removing the seat
cushion
You must remove the seat cushion if you wish
to lift the trunk floor, e.g. if the vehicle has a
flat tire.
To remove: fold seat cushion ; upwards
X
and remove it from seat cushion
guides :.
To install: push seat cushion ; into seat
X
cushion guides : at a slight angle from the
rear =.
Fold seat cushion ; back into its original
X
position ? until it engages.
Folding back the folding bench seat
Pull the seat cushion upwards by tab :
X
and fold it back into its original position
until it engages.
Press release button : and fold the head
X
restraints down.
Seats
115
Z