Rear Combination Lamps - Chevrolet Metro 1999 Owner's Manual

4. Turn the turn signal bulb or sidemarker socket
counterclockwise and pull it out.
5. Pull the old bulb straight up to remove it.
6. Reverse the steps with the new bulb.

Rear Combination Lamps

To remove the rear combination bulbs:
1. Remove the two screws from the combination lamps
on the outside of the vehicle.
2. Pull back the cover on the inside of the trunk and use
a 10 mm wrench to remove the nut.
3. Pull the assembly out far enough to reach the
bulb socket.
6-38
4. Turn the socket counterclockwise and pull it out.
5. Disconnect the bulb from its socket by twisting and
then pulling the bulb out.
6. Reverse the steps to install a new bulb.
yellowblue